| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipment description:
1 . Equipment function: Used in the rolling process of lithium-ion battery electrode production to realize the continuous rolling production of battery electrode coils and meet the specifications and quality required by the battery electrode process;
2. Equipment composition: mainly includes unwinding device, belt connecting device, edge cutting device, dust removal device, heating roller press, rewinding device, hydraulic system, drive control system, roll changing device.
|
No
|
Item
|
Data
|
|
1
|
Unwinding device
|
1. Unwinding form: fixed side plate structure, cantilever shaft form 2. Unwinding inflatable shaft: φ75*400mm, equipped with inflation gun 3. Unwinding material roll specification: Max.φ300mm 4. Unwinding drive: magnetic powder brake, passive unwinding 5. Tension control mode: the unwinding tension is controlled by the magnetic powder brake, which can be set. 6. Constant tension mode and taper tension mode 7. Tension adjustment range: 10~200N 8. Correction control: infrared photoelectric correction 9. Deviation correction stroke: ±50mm 10. Roller specification: Φ70mm, roller surface roughness Ra0.4, dynamic balance G2.5 |
|
2
|
Edge Cutting device
|
1.Function: Used to cut both sides of the gap coating electrode sheet before rolling, reduce the wrinkles of the electrode caused by the inconsistent elongation rate during rolling, and reduce the scrap rate caused by the electrode broken tape 2.Cutter form: manual (pneumatic) feed of the upper cutting blade, by the knife, and the left and right cutters are controlled separately 3.Cutting edge width: adjustable according to product needs, and can implement single or double cutting 4.Knife axis drive: independent drive for the lower knife, passive for the upper knife, and automatically match the linear speed of the rolling mill 5.Upper cutting blade: Φ90×1mm 2 pieces 6.Under cutting blade: Φ100×2mm 2 pieces 7.Edge material recycling: automatic collection with its own receptacle |
|
3
|
Dust removal device
|
1. Function: active brush roller to clean the dust on the electrode, industrial vacuum cleaner vacuum suction 2. Composition: Consists of front and rear brush rollers, air cylinders, brush roller drive motors, industrial vacuum cleaners, etc. 3. Principle: Brush the dust and burrs on the electrode with the front and back roller brushes, and suck the dust away through the dust collector 4. Number of brush rollers: 2 5. Industrial vacuum cleaner power: 1.5kW, air volume: 1800 m3/h |
|
4
|
Heating roller press
|
1.Roll size: φ300*400mm 2. Effective use width: ≥300mm
3. Heating temperature: Max.120±2ºC, the temperature is continuously adjustable, controlled by a digital display temperature
controller 4. Heating power: 24kW, heating at room temperature from 20°C to 120°C, heating stability time ≤ 4 hours |
|
5
|
Rewinding device
|
1. Rewinding form: fixed side plate structure, cantilever shaft form 2. Rewinding inflatable shaft: φ75*400mm, equipped with inflatable gun 3. Winding material roll specification: Max.φ300mm 4. Winding drive: servo motor + magnetic powder clutch 5. Tension control mode: the winding tension is controlled by the magnetic powder clutch, which can be set. 6. Constant tension mode and taper tension mode 7. Tension adjustment range: 10~200N 8. Correction control: infrared photoelectric correction 9. Deviation correction stroke: ±50mm 10. Correction accuracy: ≤±0.1mm |
We could supply one stop solution ( turn key project) for you.
1.Full set of lithium battery materials,including :
LiMn2O4,LTO,LiNiMnCoO2(NMC),LiCoO2,Graphite(MCMB)and other cathode&anode battery materials;Aluminum foil,copper foils,battery separator,etc.
2.Full set of lithium battery equipments,for example:
mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine,etc.
3.Full set of lithium battery technology.
we can design the laboratory and production line,according to customer's request.
Q 1: How to order ?
A :Please send us your purchase order by email or call us sales , then we can make the proforma invoice under your request .We need to know the following information for your order before sending your PI
1) Product information--quantity ,specification(size,technological if needed and packing requirements ect.)
2) Delivery time required.
3) Shipping information--Company name, detail address, phone number, destination sea port .
4) Forwarder's contact details if there's any in China
Q2 : I want to buy this machine, what suggestion can you give ?
A : Please tell us : What's your application and your special request of the products ? Better to let us know what's your expect performance ?
){kind=link}