| Customization: | Available |
|---|---|
| Type: | Lithium Metal Battery |
| Cathode Material: | NCM |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chemical Aqueous Binder LA132/133 For Lithium Ion Battery Lab Or Production Line
Product specifications:
|
Name |
LA133 |
LA132 |
|
Appearance |
Milky white or light yellow water emulsion |
Milky white or light yellow water emulsion |
|
Viscosity (mPa.S, 40) |
≥7300 |
≥4800 |
|
D50 (um) |
≤1.0 |
≤1.2 |
|
Solid content (%) |
15.0+-0.2 |
15.0+-0.2 |
|
pH |
7-9 |
7-9 |
LA alternative PVDF and SBR was applied to lithium ion batteries. Without adding thickener CMC and organic solvents such as NMP, production process is simple, safe, environmental protection, no pollution.
In 2008, through a long period of time of validation, the largest domestic power battery producers began in their products application LA;In 2011, through three years of authentication, LA certified by China's top battery maker, and start application in its high-end battery products.
Relative to the PVDF and SBR, LA electrical contact of electrode powder materials have more stable ability, which can effectively improve circulation, low discharge and high temperature with battery storage, such as performance, increasing the safety of the battery.
To replace PVDF LA, can completely avoid the use of organic solvents in the electrode manufacture (NMP), which not only can greatly reduce the cost of raw materials, at the same time, also can completely prevent NMP pollution to the environment and the harm of operation staff.NMP has into the high attention in 2011 by the European Union to control material.
LA has more than 10 years of marketing market, widely used in consumer electronics batteries, power batteries and energy storage batteries.In 2012, has sold more than 1150 tons, 2013 tons of annual production capacity has reached 2013.
Applicable for all kinds of cathode and anode materials
LA aqueous binder is the water dispersion of acrylonitrile multi-copolymer, it has good antioxidant and anti-reduction ability and can be applied to a variety of cathode and anode materials(including LiCoO2,LiMn2O4 and LiFePO4 cathode material,carbon anode material and activated carbon)
LA133 has a relatively high viscosity compared to LA132 and has a better suspension ability to powder materials.
LA aqueous binder has high viscosity and pure quality, thickener and organic solvent are not needed while using it, so the cost of materials can be reduced effectively, at the same time, the environmental pollution caused by solvent-based binder during the production of lithium-ion battery and poor safety can also be effectively avoided.
The lithium-ion battery which uses LA aqueous binder has excellent cycle performance and rate capability, the cell polarization is slight.
Precautions:
1. Adjust the consistency of slurry by adding water to avoid the edge folding phenomenon of slurry.
2. The small bubbles formed during the process of stirring can be eliminated by vacuum defoaming or adding a small amount of alcohol or n-butyl alcohol.
3. The content of binder in the negative electrode is suggested 2~5%,positive is 1.5~4%(lithium iron phosphate can appropriately increase the amount of binder).
4. After drying the electrode, cool it in the air before rolling, cutting and winding.
5. Fully dry to eliminate the absorbed water before injecting liquid to the battery.
6. In shelf life, it is normal that the viscosity of product increases as time goes by.
PVDF SBR CMC
Q 1: How to order ?
A :Please send us your purchase order by email or call us sales , then we can make the proforma invoice under your request .We need to know the following information for your order before sending your PI
1) Product information--quantity ,specification(size,technological if needed and packing requirements ect.)
2) Delivery time required.
3) Shipping information--Company name, detail address, phone number, destination sea port .
4) Forwarder's contact details if there's any in China
Q2 : I want to buy this machine, what suggestion can you give ?
A : Please tell us : What's your application and your special request of the products ? Better to let us know what's your expect performance ?
Q3 :How is your delivery time ?
A : Usually it takes 7-20 days after your deposit , if it's standard model that we have in stock . Other situations please consult with us in advance.
Q4 :This is the first time i use this kind of machine ,is it easy to operate ?
A : There is a English manual for each equipment that will show you how to use the machine .If there is still any questions,Please feel free to contact us by online service, such as e-mail/skype/phone/whatsapp/Wechat at any time.
Q5 :What is warranty time of machine and accessories ?
A : The guarantee period : One year
){kind=link}