Production Line 18650 32700 4680 Cell Slitter and Electrode Cutting Machine

Product Description

Production Line 18650 32700 4680 Cell Slitter and Electrode Cutting Machine

Product Overview

GN-S300R Electrode Slitting Machine

The rolled cathode/anode electrode is loaded into the roll mechanism, and through the power traction, the electrode is sent to the cutter set which is arranged according to the process specifications for slitting, and the upper and lower rewinding device collects the slit electrode into the roll, and the edge materials are collected by the edge material device. The equipment is assisted by the deviation correction system, tension drive system, dust suction system (including bladesuction dust) and other auxiliary precision operation to ensure the stable slitting of the electrode, burr, straightness and other process indicators within the process range.

FEATURES AT A GLANCE

1.Equipped with MOTION and PLC control, communication function between external systems and touch screen, the language of operation interface is in English. 2.Equipment appearance color: the standard color is dark gray, the working surface is covered with stainless steel; 3.Stand in1m away from the winding of the equipment to measure, noise ≤ 75 db (except for reasons of material, such as the sound when the tape is peeled). 4.This equipment conforms to the national safety standards of the equipment and meets the various safety standards and requirements required by the buyer's relevant safety codes.

Right elevation

 

Left elevation

Front elevation

 

PRODUCT SPECIFICATIONS

No.	Item	Content
1	Mechanical speed	Max50m/min
2	Slitting speed	0-40m/min
3	Slitting method	1. Combined Round blades group cutting 2. Pneumatic Round blades group cutting 3. Slitting size (63.5mm64.5mm )
4	Slitting Blade	1. Blade : Upper blade Φ100* Φ65*0.7mm Lower blade Φ100* Φ55*2.0mm 2. Tungsten steel alloy material.
5	Blade adjustment way	1The gap between upper and lower blade is adjustable 2Bite amount can be easily adjusted by thread
6	Blade set driving	1The tool shaft is driven by servo motor 2The percentage of linear speed of cutter group can be set and adjusted through the control screen, which is easy to operate
7	Slitting width accuracy	<=±0.1 mm
8	Electrode snake shape	<=±0.5 mm/1000 mm
9	electrode metal bur	1,Longitudinal metal burrs6μm 2,Transverse metal burr10 μm
10	Cleaning device	1, Upper blade : alcohol + felt + negative pressure; 2, Lower blade: straight row brush scrapes ; 3. Absorb dust by negative pressure.
11	Tool life	Tool service life (batch setting, blade identification, prompt alarm)
12	Demagnetization mechanism	1. Demagnetization after slitting; 2. Install magnetic rods on the front and back , with 2 groups on the top and the bottom; 3. The magnetic rod is about 10000 Gauss (front and back installation); 4. The installation distance from the electrode is 5-10mm adjustable; 5, easy to clean.

SALES AND SERVICE NETWORK

Successful Project

Project in Thailand

Project in Bolivia

Project in UK

SIMILAR PRODUCTS

 

FAQ