| Customization: | Available |
|---|---|
| After-sales Service: | 1-3year |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. This machine is used for the die-cutting process of positive and negative electrodes of square lithium-ion batteries, and adopts automatic die-cutting and forming electrodes for lithium-sulfur batteries. 2. Manually install the pole piece coil on the air expansion shaft of the equipment, the equipment automatically unwinds, the correction mechanism automatically corrects the pole piece unwinding, and controls the tension of the pole piece through the tension control system. After the pole piece undergoes secondary correction, the feeding mechanism pulls the pole piece to the punching station, automatically die-cuts the pole ear, and then passes the CCD to detect the pole piece. The feeding mechanism continues to pull it to the cutting station. The CCD detection mechanism detects and distinguishes the size of the pole piece one by one. Defective products are automatically removed to the waste box, and qualified products are collected in the finished product box. When the box is full, it automatically flows into the conveyor line, and the empty box is automatically transported to the receiving station |
1. Use lithium-sulfur mold to form the pole piece, and make the mold size according to the process to avoid puncturing the diaphragm and short-circuiting the battery cell
| name | parameter | Remark |
| CCD false detection rate | ≤0.5% | |
| CCD Missed Detection Rate | 0 | |
| CCD size detection accuracy | ±0.1mm | |
| Lithium Foil Mold | custom made | |
| Material box receiving accuracy | ±0.5mm | |
| Coil diameter | ≤φ300(mm) | |
| Roll inner diameter | φ76.2 (3 inches) | |
| Material width | 120~300(mm) | |
| Foil Width | 15~25(mm) | |
| Foil thickness | 10~25(um)(positive electrode) 6~15(um)(negative electrode) |
|
| Pole piece thickness | 100~300(um)(positive electrode) 80~150(um)(negative electrode) |
|
| Pole winding error | ±2(mm) | |
| Pole piece serpentine bending error | <2(mm/m) | |
| Height difference of pole piece wave edge | <2(mm) | |
| Correction stroke | ±30mm | |
| Correction accuracy | ±0.15mm. | |
| Production efficiency/min | Speed ≥15-20 pieces | |
| Ambient temperature | 5~35ºC | |
| Relative humidity | 5-55% HR | |
| Air/Dust | Contains no salty, toxic or corrosive gases; should be free of conductive dust | |
| Magnetic Field and Vibration | There should be no magnetic field that affects the device; there should be no impact or noticeable vibration | |
| Material system | Pole sheet coil, single-side tab | |
| Compressed air | 0.5~0.7Mpa (5~7kgf/cm²), dosage 200L/min | |
| power supply | Three-phase AC380V, 50HZ | |
| power | 25KW | |
| Dimensions | ≈L3020*W2830 *H2830mm | The size is subject to the final design |
| Weight/load capacity | About 4500Kg; > 650Kg/ M² |
We can also provide other
A complete set of Lithium Ion Battery materials:
LFP, LMO, LCO, NMC, NCA; LTO, MCMB, natural graphite, separator, electrolyte and other new power lithium-ion battery accessories
-Cathode/Anode Material Mixer
-coating machine
-Vacuum mixer
-Roller
-Press
- Slitting machine
-Welding machine
-Vacuum sealing packaging machine
- boxing machine
-Palletizer
-glove box
-Testing machine, etc.
A complete set of lithium battery technology
We specialize in designing and setting up lithium-ion battery production lines and laboratory lines with semi-automatic or fully automatic equipment.
){kind=link}