High Speed Rounded Corner Metal Die Cutting Machine

• Customization: Available
• After-sales Service: 1-3year
• Warranty: 1year
• Model NO.: GN-HD300P
• Pulling Accuracy: ±0.1mm
• Correction Accuracy: ≤±0.2mm
• Correction Stroke: ±30mm
• Production Efficiency: Production Efficiency
• Pole Piece Size Accuracy: ±0.10mm
• Material Box Receiving: ±0.5mm
• Ambient Temperature: 5~35ºC
• Relative Humidity: 5-55% Hr
• Equipment Noise: ≤75 dB (1m Away From The Machine)
• Transport Package: Standard Transport Packaging
• Specification: 5000kg
• Trademark: Gelon
• Origin: Shandong

Product Description

High speed rounded corner metal die cutting machine

Product Description

 

1. This machine is used for the die-cutting process of positive and negative electrodes of square lithium-ion batteries. It uses
hardware molds to automatically punch and form electrodes.
2. Manually install the electrode coil on the air expansion shaft of the equipment, the equipment automatically unwinds, and the correction mechanism automatically corrects the unwinding of the electrode, and controls the tension of the electrode through the tension control system. After the electrode is corrected twice, the feeding mechanism pulls the electrode to the punching station,and the hardware mold automatically forms the pole ear. The CCD detects the appearance of the front and back of the electrode. The feeding mechanism continues to pull to the cutting station, and the cutting mold automatically cuts the electrode and forms the fillet. The electrode is sent to the vacuum conveyor belt, and the upper and lower surfaces of the electrode are dusted. The CCD detection mechanism detects and distinguishes the size of the electrode one by one. Defective products are automatically removed to the waste box, and qualified products are collected in the finished product box. When the box is full, it is manually taken out.
 

Equipment Function

 

1. The pole piece is formed by a mold
2. The unwinding mechanism can realize manual and fast roll change to improve efficiency
3. The pole piece is adjusted by the unwinding correction and process correction system before die cutting to effectively ensure
the accuracy of pole piece forming
4. The materials of the punch and die are imported tungsten steel, processed by JG coordinate grinder, the mold has high precision
and good finish, and the burr on the edge of the pole piece is small and not easy to fall off
5. The punch is evenly distributed with pressure plates around it, and it is guided by many precision guide pillars to effectively
control the powder falling on the edge of the pole piece cut.
6. Material box collection, manual unloading
 

Product Parameters

project	parameter	Remark
Punch cutter type	Hardware die	Each machine is equipped with only one set of molds. If there are multiple models, customers need to purchase additional ones.
Pulling accuracy	±0.1mm
Correction accuracy	≤±0.2mm
Correction stroke	±30mm
Production efficiency	Speed ≥100ppm	Line speed ≤30m/min
Pole piece size accuracy	±0.10mm
Mold life	Used ≥ 1 million times after each mold repair Mold repair times ≥ 15 times
Cutter life	Used ≥ 1 million times after each mold repair Mold repair times ≥ 15 times
Dust removal effect	No foreign matter > 20μm,	No scratches or damage
Material box receiving accuracy	±0.5mm
Ambient temperature	5~35ºC
Relative humidity	5-55% HR
Equipment noise	≤75 db (1M away from the machine)
color	Standard warm gray 1C,	If the customer requires, color cards are required
Compressed air	0.5~0.7Mpa (5~7kgf/cm²)	Dosage: 800L/min
power supply	Three-phase AC380V /50Hz
Voltage fluctuations	±10%
power	30KW
Dimensions	L6630x W1060 x H2270mm	Dimensions including dust cabinet
Equipment weight	About 5T

Project Cases

Company Profile

FAQ